How To Unclog A Toilet Full Of Poop And Water

Ever had that moment when you flush the toilet but the contents won’t go down? A clogged toilet full of poop and water creates an embarrassing predicament and can turn into a household nightmare. Minor toilet clogs can be cleared using a plunger or drain snake, but more severe blockages may require intervention from a professional plumber in Rancho Cucamonga. At this point, it’s important that we warn you against flushing chemical drain cleaners in an attempt to clear a clogged toilet.
Fortunately, knowing how to unclog a toilet can save you time, stress, and embarrassment. With the right steps and tools, you can unclog a toilet full of poop and water without making a mess. This guide by High Speed Plumbing will look into the proven methods for unclogging a blocked toilet. If you need help from a dependable plumber in Rancho Cucamonga, we are one phone call away.

Step 1: Don’t Flush Again
If the toilet bowl is already full, flushing will likely cause an overflow. Leave the water level as it is and remove the tank lid if needed so you can shut off the water quickly. The shut-off valve is usually located behind the toilet near the floor. Turn it clockwise to stop the flow.
Step 2: Protect Yourself and the Area
Put on rubber gloves and lay old towels or paper towels around the base of the toilet to catch splashes. This keeps the mess contained and makes cleanup easier.
Step 3: Use a Proper Plunger
A flange plunger (the kind with an extended rubber flap) works best for toilets. Place it firmly over the drain hole, ensuring a tight seal. Push down gently at first to avoid splashing, then plunge with steady, controlled force 10–15 times. The goal is to loosen the blockage, not force it deeper.
After plunging, wait a few seconds and see if the water level drops. If it does, flush once carefully to check if the clog is gone.
Step 4: Add Dish Soap and Hot Water
If plunging alone doesn’t work, pour about ½ cup of liquid dish soap into the bowl. Let it sit for 10–15 minutes to lubricate the clog. Then slowly add a bucket of hot water from waist height. The pressure and lubrication can help break up and move the blockage.
Step 5: Try a Toilet Auger
If the clog persists, a toilet auger, also known as a plumbing snake, can reach deeper into the drain line when your toilet keeps clogging. Insert it carefully, crank the handle, and gently break up or pull out the obstruction. This is especially helpful if the clog is caused by excessive toilet paper or solid waste. If you encounter any challenges, seek help from an experienced plumber in Rancho Cucamonga.
What NOT to Do
- Don’t use chemical drain cleaners—they can damage pipes and splash back dangerously
- Don’t keep flushing repeatedly. This can worsen the situation and cause a mess in your bathroom should the wastewater overflow.
- Don’t use boiling water, as it can crack the toilet bowl
Need Help Figuring Out How To Unclog A Toilet? Call High Speed Plumbing Today
When your DIY efforts hit a dead end, it’s time to call a local plumber in Rancho Cucamonga. Here at High Speed Plumbing, we specialize in unclogging sinks and toilets, clearing slow-draining shower drains, hydro jetting sewer lines, and much more. We’re a licensed and insured plumbing company and always ready to help—whether the clog is caused by a buildup of foreign items or pipe damage. Get in touch with High Speed Plumbing today, and let’s get your toilet back on track.
