4 Hacks For Unclogging Your Sink

Many are times when your sink clogs and you do not know what do. There are many ways in which you can do the unclogging of the sink on your own. Depending on the complexity of the problem, the tips we shall discuss here could help you to work out the clogging problem and ensure that the sink is working again. So, what are some of the things one can do to unclog their sink? Well, you need to know more about how to unclog a bathroom sink with hair and other materials.

Here are 4 hacks for unclogging your sink:

1.    Use of boiling water

There are many solutions that one can use to unclog their sinks. However, boiling water is one of the best of these choices. You should boil water and use it for this purpose. However, as you wait for the water to boil, you need to remove as much water from the sink as possible. Pour an entire kettle of hot water into the sink. Wait for the drain to unclog. If it does not work the first time you do it, you can do it as many times as possible.

2.    Disposal

You should check the garbage disposal and ensure that it is not the cause of the clogging. If the disposal is clogged, then it will definitely stop the drain. You need to run the disposal to ensure that it clears the clog. In the event that it has overheated, you have to flip the switch found on the unit.

3.    Use a Plumber’s snake

This is another very good way you can unclog your sinks and have it working perfectly again.  This tool is also known as an auger and can help clear clogs that are stuck down the system. However, one will need to disassemble the drainpipe as well as the P-trap so as to expose the “stubout” pipe running behind the cabinet wall.  It is at this point that you will insert the snake down the pipe until the point when you feel some resistance. This way, you will break the clog and consequently unclog the sink pipe.

4.    Use a coat hanger

A coat hanger made of wire will work for this purpose. This is a good option for the people who may not have a Plumber’s snake. All you need to do is straighten the coat hanger so that it can be used to reach the areas where the sink clog is. It may not reach as far as the plumber’s snake would. However, it comes in handy as it is a good alternative. You will need to insert it into the drain pipe or the stub pipe. Even if it may not reach all the clogs, it will still reach some and help in unclogging the sink.

Obviously, it is important that you avoid clogs in the first place so you don’t have to worry about unclogging your sink. However, we realize that mom life is hard sometimes and your eyeballs can’t be everywhere!