3 Tips For Getting The Cleanest Drinking Water

Water is a crucial element to one’s life. The ancient Greeks believed water to be one of the four pillars of life alongside fire, earth, and air. And they were not wrong in believing so.

While water covers almost three quarters of the earth’s surface, roughly three percent of it only is accessible for our consumption. The human body is never designed to do away with water. As a matter of fact, more than half of our body weight is due to the presence of water in our system. Sure, you can go on for weeks without food, but going for a few days without water will send you to your final resting place.

Having established the value of water in our lives, it is of much importance that we have access to the cleanest, clearest, purest drinking water. But with the increasing threats to our drinking water- pollution, chemical presence, bacteria, and viruses- how do we ensure that the water we drink won’t send us running to the nearest ER? Modern-day innovations easily allow us to do that through the use of the best under sink water filter technology. These filters use reverse osmosis to decontaminate drinking water from all harmful particulates and pathogens.

Here are 3  useful tips to help you get that tap water clean and clear:

1.  Test and assess.

The only sure way to quantitatively measure the quality of water in your home is to perform a test. It may either be done by a qualified third-party contractor, or you can get your own home-based testing kits which are relatively inexpensive and pretty much DIY stuff. Most testing kits will alert you through some sort of indicator or color change if there is a presence of dangerous chemicals or germs. But if you really want confidence from a water test, then have it done by a professional water tester. They will perform complete analysis such as ppm (parts per million) or ppb (parts per billion) and give you a comprehensive report on the findings.

2.  Invest in a filter.

Don’t treat those water tests as infallible. It’s not like you do water testing every hour of every single day. Anything between the water company and your home could go wrong any minute- especially the pipelines. Any point of failure along miles and miles of piping can be an entry point for harmful substances to contaminate your home’s water system. Getting a filter will add a significant layer of defense against these potential risks. Look for filters that are rated with ANSI standards, as they have been tested and proven efficient and effective in laboratory conditions by a competent standards checklist.

3.  Maintain your equipment.

It is not enough that you just have a filter and forget about it. Don’t be lazy and neglect things like home repairs that you should be doing- you might end up regretting it over a stomach ache and a wave of diarrhea attacks. Instead, do your homework and follow manufacturer guidelines on cleaning and maintaining your filter. Note that the filter degrades over time and its ability to clean your water will be reduced if you don’t pay any attention to it.